The Husqvarna 49 chainsaw was introduced by Husqvarna Vapenfabriks AB of Huskvarna, Sweden in 1996. With an engine displacement of 49ccm (3.0 cu. in.) and a cylinder bore of 44mm (1.73 in.), this saw was a powerful and reliable tool for professionals and homeowners alike. Featuring an aluminum cylinder with a chrome-plated bore and a piston-ported intake method, the 49 was built to last.
Weighing in at 4.9 kg (powerhead only) and equipped with an anti-vibration handlebar system, an inertia-activated chain brake, and a centrifugal clutch, the 49 was easy to handle and safe to operate. With a direct drive type and construction that combined injection molded polymer with die-cast magnesium, the 49 was built to withstand tough conditions.
The saw was equipped with an automatic oil pump and could reach a maximum engine RPM of 12,500 (with bar and chain installed). The Husqvarna 49 chainsaw is no longer in production, but it remains a favorite among collectors and enthusiasts for its durability, power, and quality craftsmanship.
|Husqvarna Vapenfabriks AB, Huskvarna, Sweden
|49ccm (3.0 cu. in.)
|44 mm (1.73 in.)
|32 mm (1.26 in.)
|Aluminum with Chrome Plated Bore
|4.9 kg powerhead only
|Injection Molded Polymer, Die Cast Magnesium
|Walbro WT Series, Zama C1Q-EL1, C1Q-EL5
|Major Repair Kit
|K10-WAT for Walbro, RB-45 for Zama
|Minor Repair Kit
|D10-WAT for Walbro, GND-33 for Zama
|Air Filter System
|Nylon Mesh Cartridge
|Maximum Engine RPM
|12,500 max free with bar and chain installed
|Breaker Point Setting
|Flywheel/Coil Air Gap
|0.30 mm (0.012 in.)
|Spark Plug Type
|Bosch WSR7F/WS7F, NGK BPMR7A, Champion RCJ7Y
|Spark Plug Gap
|0.50 mm (0.020 in.)
|Crankshaft Main Bearings
|Fuel Tank Capacity
|500 ml (16.9 fl. oz.)
|Fuel Oil Ratio
|Recommended Fuel Octane
|Mix Oil Specification
|Electrolux Approved Oil, Husqvarna Mix Oil
|Bar Mount Pattern
|Shortest Guide Bar Supplied
|33 cm (13 in.)
|Longest Guide Bar Supplied
|45 cm (18 in.)
|Illustrated Parts List
In conclusion, the Husqvarna 49 chainsaw was a reliable and efficient tool manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. Introduced in 1996 and no longer in production, this chainsaw boasted a powerful 49ccm engine with a 44 mm cylinder bore and a 32 mm piston stroke.
The chainsaw had an anti-vibration handlebar system, an inertia-activated chain brake, a centrifugal clutch, and a direct drive type. Its construction featured an injection-molded polymer and a die-cast magnesium, making it lightweight at 4.9 kg for the powerhead only.
With an automatic oil pump and a nylon mesh cartridge air filter system, this chainsaw required minimal maintenance. It is a testament to Husqvarna’s commitment to creating high-quality and durable tools for professionals and DIY enthusiasts alike.