The Husqvarna 50 chainsaw was a popular model produced by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. It was introduced in 1985 and quickly became a favorite among homeowners and professional loggers alike. With a powerful 48.7ccm (2.92 cu. in.) engine and sturdy die-cast magnesium construction, the Husqvarna 50 was a reliable and efficient tool for cutting through trees of all sizes.
It also featured an anti-vibration handlebar system and a chain brake for added safety. However, this model is no longer in production and has been discontinued by the manufacturer. Nonetheless, the Husqvarna 50 remains a beloved piece of equipment for many who appreciate its durability and performance.
Specifications Chart
| SPECIFICATION | DETAILS |
|---|---|
| Manufactured by | Husqvarna Vapenfabriks AB, Huskvarna, Sweden |
| Year introduced | 1985 |
| Engine displacement | 48.7ccm (2.92 cu. in.) |
| Cylinder bore | 44mm (1.73 in.) |
| Piston stroke | 32mm (1.26 in.) |
| Cylinder type | Aluminum with Chrome plated bore |
| Intake method | Piston ported |
| Weight | 5.9 kg with 32 cm bar & chain (13 lbs. with 13 in.) |
| Handlebar system | Anti-vibration |
| Chain brake | Yes |
| Clutch | Centrifugal |
| Drive Type | Direct |
| Construction | Die-cast Magnesium |
| Magneto type | Electronic |
| Carburetor | Walbro WA-82A series |
| Major repair kit | K10-WAT |
| Minor repair kit | D10-WAT |
| Air filter system | Nylon mesh cartridge |
| Starter type | Husqvarna automatic rewind |
| Oil pump | Automatic, adjustable |
| Maximum engine RPM | 8,400 under load, 12,500 free |
| Idle RPM | 2,500 |
| Ignition timing | fixed |
| Breaker point setting | none |
| Flywheel/coil air gap | 0.3 mm (0.012 in.) |
| Spark plug type | Bosch WS7F, Champion CJ7Y |
| Spark plug gap | 0.5mm (0.020 in.) |
| Crankshaft main bearings | Ball |
| Fuel tank capacity | 600 ml (1.27 pints) |
| Fuel oil ratio | 40:1 |
| Recommended fuel octane | Regular |
| Mix oil specification | Husqvarna oil or two-stroke chain saw mix oil |
| Chain pitch | .325 in. |
| Chain type | Oregon 21LG |
| Bar mount pattern | 01 link |
| Shortest guide bar supplied | 33cm (13 in.) |
| Longest guide bar supplied | 50cm (20 in.) |
| Color scheme | Husqvarna Orange |
| Illustrated parts list | Yes |
| Service manual | Yes |
In conclusion, the Husqvarna 50 chainsaw was a popular model that was introduced in 1985 and was manufactured by Husqvarna Vapenfabriks AB in Huskvarna, Sweden. It had an engine displacement of 48.7ccm, a weight of 5.9 kg with a 32 cm bar and chain, and featured an anti-vibration handlebar system, a chain brake, and a centrifugal clutch.
The chainsaw was powered by an automatic, adjustable oil pump and had a maximum engine RPM of 8,400 under load and 12,500 free. Despite being no longer in production, the Husqvarna 50 remains a popular choice for those seeking a reliable and powerful chainsaw for their needs, if you can find it in the secondhand market
Husqvarna 50 Specifications is what I was looking for s I have an old saw picked up at a garage sale…Thanks